Hi-Bond Clear Table Top Resin

Hi-Bond Clear Table Top ResinHi-Bond Clear Table Top epoxy coating for bar tops, tabletops, plaques, etc.Dries to a high gloss finish.Mix ratio is 1 part hardener to 1 part resin.Used in restaurants all over the U.S.The quart kit is a quart total volume when combined with hardener.Hi-Bond Clear Table Top Resin Application InstructionsHi-Bond Table Top Epoxy should be stored at room temperature for at least 24 hours prior to usage.Measure exact equal parts of the resin and the hardener into a clean, dry container.Note: Do not adjust the ratio in an attempt to adjust the working time.Mix the resin and the hardener together. Mix well for two or three minutes until the materials are thoroughly mixed.Note: Ensure sidewalls and bottom are blended into the mix.Pour the mixed product onto the surface and spread using a brush. The material is self-leveling and will eventually level out any paths left by a brush.Allow the material to cure overnight. Depending on temperature, it may take as long as 24 hours for the material to cure.Instructions from Hi-Bond Table Top Epoxy Preparation, Mixing and Application Guide.