Interlux Schooner Gold Marine Varnish QT

Interlux Schooner Gold Marine Varnish QTAdvanced, High Build formulation for Applicators who prefer a High Viscosity product.Schooner Gold is the latest varnish from Interlux, offering higher film build that allows both Professional Applicators and boat owners to achieve great results faster and in fewer coats. Schooner Gold has shown to out-perform other leading brands and will offer superb longevity and durability.Schooner Gold has been formulated using an optimized blend of premium UV absorbers, HALS and resins to ensure the product’s exceptional deep gloss and color are retained over the lifetime of the coating. Suitable for all internal and external woods, and can be applied directly to oily timber, such as teak.Advanced UV TechnologyLongest lasting one-part varnish – 12 months or more in Florida!Traditional amber colorHigh build formulation achieves aesthetic results in fewer coatsSpecifications:Finish:High GlossNumber of Coats: 2-6Application: Brush, roller & sprayAssociated ProductsInterlux Brush Thinner -To ease application for roller and brushInterlux Special Thinner -Spraying Application***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***How to ApplyHOW TO APPLY INTERLUX SCHOONER GOLD MARINE VARNISH QTAPPLICATION: Brush, Roller, Conventional SprayFINISH: High GlossNUMBER OF COATS: Previously varnished wood: 2-4 unthinned coats (4-6 coats if thinned). Bare wood: 2 thinned coats, then 4 unthinned coats (6 coats if thinned).COVERAGE: (Theoretical) 582.1/gal by brush | (Practical) 525.1 /gal by brushTHINNER: Brush Brushing Liquid 333 | Spray Special Thinner 216DRY TIMES:TemperatureHard DryTouch Dry50F12 HRS4 HRS59F9 HRS4 HRS73F6 HRS2 HRS95F3 HRS1 HROVERCOAT BY:TemperatureMinimumMaximum50F16 Hrs1 Month59F14 Hrs1 Month73F12 Hrs1 Month95F8 Hrs1 MonthPREPARATION PROCEDURES:Previously Varnished WoodIn good condition clean with thinners; sand with 280-320 grade (grit) paper. Remove sanding dust with thinners.In poor condition, remove all previous coatings. Apply 2-6 coats until a satisfactory finish is achieved. Sand after every second coat using 320-400 grade paper. Remove sanding dust with dust wipe.Bare WoodSand smooth with 80-180 grade paper and then 280 grade paper. Clean surface by brushing, dusting or wiping. If wiping with solvent, then allow to dry completely before applying first coat of varnish.Oily Woods (e.g. Teak)Must be adequately degreased (Brushing Liquid 333 is recommended) and prepared prior to the application of Schooner Gold.Prime, if required, with Clear Wood Sealer.APPLICATION:If Clear Wood Sealer has been omitted, thin the first coat by 50% using Brushing Liquid 333. Apply the second coat thinned 25% with Brushing Liquid 333. Following coats can be thinned up to 15% dependent on ambient temperature, application conditions and personal preference using Brushing Liquid 333.Apply a further 4-6 coats (brush)/5-8 coats (roller), until a satisfactory finish is achieved. Sand after every second coat using 320-400 grade paper.Application SpecificationsStir thoroughly before useBrushUse a clean brush that is kept specifically for varnishing. Clean brushes before use.Conventional SprayPressure Pot 1-2 bar 14.5-29 psi (gun pressure), 8-10 psi (ai