Lenco 101XDS Short Replacement Trim Tab Actuator

Lenco 15058-001 101XDS Short Replacement Trim Tab ActuatorLenco Actuators are durable and maintenance-free. Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance and high strength for long life. Lenco’s ballscrew design creates a more reliable trim tab actuator that is twice as powerful compared to typical hydraulic actuators. This 12V actuator features a tough, high-torque motor that easily pushes 500lbs.Built for marine environments, this actuator has an improved O-ring design and an integrated wiper seal. The waterproof Deutsch connector eliminates the possibility of water intrusion and makes for easy plug and play installation. This trim tab kit contains all necessary mounting hardware along with a 6′ wire. This actuator has a 3/8″ top and end hole.Lenco Part#: 15058-001OEM Part#: 20402-002Trim Tab Actuator Construction Details:Top Cap DesignStronger top cap mounting clevis design.Torx ScrewsNew & improved pressure-tight torx screwsThrust BearingMolded-in thrust bearing designHousing WallThicker and stronger motor housing wallOver-Molded CableOver-molded cable providing a stronger, tighter sealUpper BracketUpper mounting bracket with gland sealSpecifications:Top Cap Hole: 3/8″End Hole: 3/8″Stroke Length: 2-1/4″Voltage: 12VWire Length: 6’Overall Length Tip-to-Tip: 10-7/8″Features:WaterproofBall Screw Design.Deutsch ConnectorsDurableInsant ResponseHigh-Impact, ultraviolet resistant nylonLenco 101XDS Replacement Actuator FAQsWill the Lenco 15058-001 actuator fit my boat?The Lenco 15058-001 may be the correct replacement if your existing trim tab system uses a 12V 101XDS short actuator with a 2.25-inch stroke, 3/8-inch top-cap hole, and 3/8-inch end hole. It replaces Lenco OEM part number 20402-002. Confirm the existing actuator type, voltage, stroke length, mounting-hole configuration, and part number before ordering.What OEM part number does the Lenco 15058-001 replace?The Lenco 15058-001 101XDS short actuator replaces OEM part number 20402-002.What is the stroke length of the Lenco 15058-001 actuator?This Lenco 101XDS short replacement actuator has a 2.25-inch stroke and an overall tip-to-tip length of 10.875 inches.What mounting-hole sizes does this actuator use?The Lenco 15058-001 uses a 3/8-inch top-cap mounting hole and a 3/8-inch end mounting hole. Both mounting points should match the existing actuator installation.Is the Lenco 15058-001 a 12V or 24V actuator?The Lenco 15058-001 is a 12V trim tab actuator. It should be used only with a compatible 12V Lenco trim tab system.What is included with the Lenco 15058-001 actuator?This replacement actuator includes the necessary mounting hardware and a six-foot wire.Does the Lenco 15058-001 use a waterproof connector?Yes. The actuator uses a waterproof Deutsch connector designed to reduce the possibility of water intrusion and support plug-and-play installation.How do I identify my existing Lenco trim tab actuator?Locate the five-digit branding code on the face of the actuator near the Lenco label. Use the second digit to identify the actuator type and the fifth digit to identify the mounting-hole configuration. Compare the code, voltage, stroke length, mounting-hole sizes, and OEM part number before selecting a replacement. See our Lenco trim tab actuator identification guide for step-by-step help.Are Lenco 101XDS actuators interchangeable?Not all Lenco 101XDS actuators are interchangeable. Replacement models may differ in stroke length, voltage, mounting-hole sizes, wire configuration, and OEM part number. Verify all specifications rather than choosing an actuator based only on appearance.Can I replace only one Lenco trim tab actuator?A single actuator may be replaced when the new actuator matches the existing trim tab system and the actuator on the opposite side is still operating correct