Powerwinch “Class 36” Freefall Anchor Windlass

Powerwinch “Class 36″ Free-Fall Anchor WindlassFastest way to anchor – Anchor drops up to four times faster! Easiest way to anchor – Free-Fall stops when the anchor has reached bottom – Rope does not collect on your deck while you waste time and effort powering down. Easiest to use – just hold the helm switch for only five seconds to release free-fall, versus one to three minutes powering down. Safety – Allows you to anchor quickly in poor conditions. Precise anchoring location – Anchor your boat where you want it to be, unlike powering down where your boat will drift while you power down.Powerwinch offers durable and smooth Free-Fall Anchor Windlass. Their free fall system allows the anchor to fall at a rate of up to 300′ per minute. Easily four time faster than powering down. The gear systems are oil impregnated with heat treated oil. Stainless steel drive shafts give years of smooth and reliable performance. A tapered splice is ideal for smooth rope-to-chain transition. The motor plate is made of one piece which provides improved gear life and and smooth power transmission. The smooth motor uses less amps by not needing the battery power during free-fall. Watertight sealed stainless sealed fasteners are easy to remove and have excellent corrosion resistance.Features:Unit Weight 22 lbsRetrieval Speed 80′ / minuteLine Size 1/2″ Powerwinch Premium Medium Lay NylonOverall Dimensions 10-9/16″ L x 7″ W x 6-5/16″ HPulling Power 775 lbsAvg. Amp Draw (during retrieval) 8-12 ampsAnchoring Speed Up to 250′ per minuteChain Size 1/4” Hi-test ACCO G4Rodes (sold separately) P10293-P10296Rope & Chain System Electro-Plated Stainless SteelReplaceable Rode-Glide Engineered ResinIncludes: Helm Operated Control Switch Rocker and 25 AMP Thermal Circuit BreakerClick here to download Powerwinch Free-Fall Anchor WindlassRequired Materials Not Included with Powerwinch Class 36 Freefall Anchor WindlassBelow is a chart outlining the materials you will need IN ADDITION to buying your windlass. The following are required for an electrical installation:Qty.Description2 ft12 awg RED Wire Class 105C2 ft12 awg BLACK Wire Class 105C70 ft6 awg RED Wire Class 105C6 awg wire is the “run” wire from anchor to switch and battery to switch. Length is based on instalation70 ft6 awg BLACK Wire Class 105C105/16″ 6 awg ring terminals45/16″ 12 awg ring terminals41/4″ 12 awg insulated female spade quick disconnects61/4-20 x 1/2 Screws Screws and nuts should be stainless steel to avoid rust and corrosion.61/4-20 NutsWire Ties2 ft1″ diameter heat shrink2 ft2″ diameter heat shrink